GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 HHR 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Crankshaft Position Sensor Replacement

Removal Procedure

    Object Number: 1622787 Size: SH
  1. Remove the starter. Refer to Starter Motor Replacement .
  2. Disconnect the crankshaft position (CKP) sensor electrical connector (4).

    3. Object Number: 1578475 Size: SH
  3. Remove the CKP sensor bolt.
  4. Remove the CKP sensor.

Installation Procedure

    Object Number: 1578475 Size: SH
  1. Lubricate the CKP sensor O-ring seal with clean engine oil.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the CKP sensor.
  3. Install the CKP sensor bolt.

    4. Tighten
    Tighten the sensor bolt to 10 N·m (89 lb in).


    Object Number: 1622787 Size: SH
  4. Connect the CKP sensor electrical connector (4).
  5. Install the starter. Refer to Starter Motor Replacement .