GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 HHR 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Accelerator Pedal Position Sensor Replacement

Removal Procedure

    Object Number: 1633081 Size: SH
  1. Remove the knee bolster. Refer to Knee Bolster Replacement .
  2. Remove the insulator panel. Instrument Panel Insulator Replacement .
  3. Disconnect the accelerator pedal position (APP) sensor electrical connector (1).

    4. Object Number: 1633085 Size: SH
  4. Remove the APP sensor nuts.
  5. Remove the APP sensor.

Installation Procedure

    Object Number: 1633085 Size: SH
  1. Install the APP sensor.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the APP sensor nuts.

    3. Tighten
    Tighten the nuts to 10 N·m (89 lb in).


    Object Number: 1633081 Size: SH
  3. Connect the APP sensor electrical connector (1).
  4. Install the insulator panel. Instrument Panel Insulator Replacement .
  5. Install the knee bolster. Refer to Knee Bolster Replacement .