Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

Disable the SIR in Zones 2 or 6. Refer to SIR Disabling and Enabling .

1

Bolt, Seat Belt Anchor

Tighten
45 N·m (33 lb ft)

Tip
Move the seat to the full forward position to gain access to the bolt.

2

Cover, Seat Belt Adjuster

3

Bolt, Seat Belt Adjuster

Tighten
45 N·m (33 lb ft)

4

Bolt, Seat Belt Retractor

Tighten
45 N·m (33 lb ft)

Tip
Remove the center pillar lower trim panel to gain access to the bolt. Refer to Center Pillar Lower Trim Panel Replacement .

5

Retractor Assembly, Front Seat Belt

Tip
Disconnect the belt tension sensor electrical connector.