Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

1. Open the liftgate.
2. Remove either the LH or RH rear quarter trim panel access hole cover.
3. Disconnect the electrical connector at the backup lamp bulb socket.

1

Nuts, Backup Lamp Assembly (Qty: 3)

Tighten
6 N·m (53 lb in)

2

Bracket, Backup Lamp Assembly

Tip
Pull the bracket toward the front of the vehicle off the backup lamp studs.

3

Lamp Assembly, Backup

Tip
Remove the lamp assembly from the exterior of the rear body panel.