Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

1. Open the liftgate.
2. Remove either the LH or RH rear quarter trim panel access hole cover.
3. Disconnect the electrical connector at the backup lamp bulb socket.
4. Turn the lamp socket a quarter turn counterclockwise and remove.

1

Nuts, Backup Lamp Assembly (Qty: 3)

Tighten
6 N·m (53 lb in)

2

Socket, Backup Lamp

3

Bulb, Backup Lamp Assembly

Tip
Pull the bulb straight from the bulb socket.