Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

1

Screw, Rear Side Marker Lamp

Tighten
2 N·m (18 lb in)

Tip
Ensure the screw gasket is in place prior to tightening the screw.

2

Lamp Assembly, Rear Side Marker

Tip
Pull the top of the lens outward and lift the lamp from the bumper fascia.

3

Socket, Rear Side Marker Lamp

Tip
Twist the socket counterclockwise from the lamp housing to remove.

4

Bulb, Rear Side Marker Lamp

Tip
Pull the bulb straight out from the lamp socket.