Callout
| Component Name
|
Preliminary Procedures
- Turn the ignition switch to the OFF position.
- Remove the cover from the engine control module (ECM) and the transmission control module (TCM).
|
1
| Bolt, Brake Pressure Modulator Valve (BPMV) to Mounting Bracket
Notice: Refer to Fastener Notice in the Preface section.
Tighten
11 N·m (97 lb in) |
2
| Pins, BPMV Mounting
Tip
| • | Do not pry against the accumulator covers on the underside of the brake modulator assembly to release the mounting pins from the bracket insulators. |
| • | Do not remove the mounting pins unless it is necessary to aid in releasing the modulator assembly from the bracket. |
| • | Position and support the modulator assembly to aid in bracket removal. |
Tighten
10 N·m (89 lb in) |
3
| Bracket, BPMV
Tip
| • | Loosen the BPMV bracket forward upper mounting bolt and remove the remaining bolts. |
| • | Inspect the insulators and replace if necessary. |
|
