Important: Before replacing any engine mount due
to suspected fluid loss, verify that the source of the fluid is the engine mount,
not the engine or accessories.
- Install the engine support fixture. Refer to
Engine Support Fixture .
- Raise the engine slightly and observe the engine mount. Raising the engine
removes the weight from the engine mount and creates a slight tension on the rubber
portion.
- Replace the engine mount if the engine mount exhibits any of the following
conditions:
| • | The hard rubber is covered with heat check cracks. |
| • | The rubber is separated from the metal plate of the engine mount. |
| • | The rubber is split through the center of the engine mount. |
| • | The engine mount itself is leaking fluid. |
- For engine mount replacement. Refer to
Engine Mount Replacement .
