Rear Side Door Lower Molding Replacement. Chevrolet HHR 2007

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2007 🢒 HHR 🢒 Body Hardware and Trim 🢒 Exterior Trim 🢒 Rear Side Door Lower Molding Replacement

Callout	Component Name
Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .
1	Rear Side Door Center Molding Important: When removing protective liners from adhesive backed molding , be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion. Tip Use a J 25070 Heat Gun or equivalent to remove the old molding. Clean all the adhesive residue from the door, wipe surface dry with a clean lint-free towel prior to installing new molding.

Callout

Component Name

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Rear Side Door Center Molding

Important: When removing protective liners from adhesive backed molding , be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.

Tip
Use a J 25070 Heat Gun or equivalent to remove the old molding. Clean all the adhesive residue from the door, wipe surface dry with a clean lint-free towel prior to installing new molding.