Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

1

Emblem Assembly, Rear Compartment Lid

Important: When removing protective liners from adhesive backed emblems, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.

Tip
Use a J 25070 Heat Gun or equivalent to remove the old emblem. Clean all the adhesive residue from the door, wipe surface dry with a clean lint-free towel prior to installing new emblem.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

1

Emblem Assembly, Rear Compartment Lid

Important: When removing protective liners from adhesive backed emblems, be careful not to touch tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.

Tip
Use a J 25070 Heat Gun or equivalent to remove the old emblem. Clean all the adhesive residue from the door, wipe surface dry with a clean lint-free towel prior to installing new emblem.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

1

Emblem Assembly, Rear Compartment Lid (Chevrolet)

Tip

1. When removing protective liners from the adhesive tape, be careful not to touch the tape with hands and do not allow tape to come in contact with dirt or any foreign matter prior to adhesion.
2. Use a J 25070 Heat Gun or equivalent to remove the old emblem. Clean all adhesive from the rear liftgate center applique, wipe the surface dry with a clean lint-free towel prior to installing new emblem.
3. Close the liftgate prior to the emblem adhesion.