Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

1. Open the liftgate.
2. Remove either the LR or RR quarter trim panel access hole cover in order to access the rear tail lamp connectors and fasteners.
3. Disconnect the rear tail lamp bulb electrical connector.

1

Socket, Tail Lamp Bulb

2

Nuts, Tail Lamp (Qty: 3)

Tighten
6 N·m (53 lb in)

3

Bracket, Tail Lamp

Tip
Pull the bracket forward in the vehicle to remove.

4

Lamp Assembly, Tail

Tip
Remove the tail lamp from the exterior side of the rear body panel.