- Open the sunshade.
- Close the sunroof window.
- Remove the cover, that conceals the bolts on the window, from the left and right side. Refer to
Sunroof Panel Side Opening Closeout Cover Replacement
.
- Loosen the adjusting screws.
- Adjust the corners of the glass panel (3) using the following guidelines:
• | Adjust the front of the sunroof window (2) flush to 1 mm (0.04 in) below the top surface of the roof panel. |
• | Adjust the rear of the sunroof window (1) flush to 1 mm (0.04 in) above the top surface of the roof panel. |
Notice: Refer to Fastener Notice in the Preface section.
- Install the sunroof window adjustment screws.
Tighten
Tighten the sunroof window adjusting screws to 6 N·m (53 lb in).
- Install the left and right side covers. Refer to
Sunroof Panel Side Opening Closeout Cover Replacement
.