Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

Disable the roof rail SIR system. Refer to SIR Disabling and Enabling .

1

Cover, Upper Garnish Molding

2

Screw, Upper Garnish Molding

Tighten
2 N·m (18 lb in)

3

Panel Assembly, Center Pillar Upper Trim

1. Remove the seat belt D-ring from the adjuster assembly.

Tighten
43 N·m (32 lb ft)

2. Pull the trim panel toward the inside of the vehicle to disengage the retainers.

4

Clip, Center Pillar Upper Trim (Qty: 3)