Intake Camshaft, Bearing Cap, and Lash Adjuster Removal for Chevrolet HHR 2008

Important: Remove each bolt on each cap one turn at a time until there is no spring tension pushing on the camshaft.

1. Mark the camshaft caps to ensure they are installed in the same position.
2. Remove the intake camshaft cap bolts.
3. Remove the camshaft caps.
4. Remove the intake camshaft.




Important: Keep all of the roller finger followers and hydraulic lash adjusters in order so that they can be reinstalled in their respective locations.

5. Remove the intake camshaft roller finger followers.



6. Remove the hydraulic lash adjusters.