GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 HHR 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Drive Belt Tensioner Replacement

Removal Procedure

    Object Number: 1717781 Size: SH
  1. Remove the drive belt. Refer to Drive Belt Replacement .
  2. Insert a pry bar between the engine and the cradle, and raise the engine slightly until a socket with an extension can be installed onto the drive belt tensioner bolt.

    3. Object Number: 1571145 Size: SH
  3. Remove the drive belt tensioner bolt.
  4. Remove the drive belt tensioner.

Installation Procedure

    Object Number: 1571145 Size: SH
  1. Position the drive belt tensioner.
  2. Insert a pry bar between the engine and the cradle, and raise the engine slightly until the drive belt tensioner bolt can be installed.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Tighten the drive belt tensioner bolt.

    4. Tighten
    Tighten the bolt to 45 N·m (33 lb ft).

  4. Install the drive belt. Refer to Drive Belt Replacement .