Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .

1

Upper Shock Absorber Bolt

Notice: Refer to Fastener Notice in the Preface section.

Tip
Support the rear axle with a jack stand.

Tighten
90 N·m (66 lb ft).

2

Rear Shock Absorber Bolt

Tip
Support the rear axle with a jack stand.

Tighten
125 N·m (92 lb ft).

3

Rear Shock Absorber