Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Move the window to the full up position and secure in place with tape.
2. Remove the interior trim panel. Refer to Front Side Door Trim Panel Replacement .
3. Remove the water deflector. Refer to Front Side Door Water Deflector Replacement .
4. Loosen the bolts on the clamps that secure the window to the regulator.

1

Side Door Window Regulator Nut (Qty: 4)

Tighten
10 N·m (89 lb in)

2

Front Side Door Window Regulator Assembly

Tip
Disconnect the electrical connector.