GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 HHR 🢒 Brakes 🢒 Park Brake 🢒 Parking Brake Lever Replacement

Object Number: 1744440 Size: MF

Callout

Component Name

Preliminary Procedures

  1. Disable the SIR system. Refer to SIR Disabling and Enabling .
  2. Remove the console. Refer to Console Replacement .
  3. Fully release the park brake lever.

1

Park Brake Indicator Switch Electrical Connector

Tip
Ensure that the connector is located to the side.

2

Park Brake Cable Adjusting Nut

Tip

    •  Use ONLY HAND TOOLS when loosening or tightening the adjusting nut
    • Loosen the nut enough to completely relieve tension on the front cable.

3

Rear Park Brake Cable (Qty: 2)

Tip
Release the rear cable ends from the cable equalizer.

4

Park Brake Lever Assembly Nut (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
25 N·m (18 lb ft)

5

Floor Console Bracket

6

Rear Park Brake Cable Guide Tubes

Procedure

Release the rear cable guide tube ends from the park brake lever.

7

Park Brake Lever Assembly

Procedure

Adjust the park brake. Refer to Park Brake Adjustment .