Preliminary Procedure

Remove the instrument panel insulator. Refer to Instrument Panel Insulator Replacement .

1

Clutch Pedal Position Sensor Bolt

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2.5 N·m (22 lb in)

2

Clutch Pedal Position Sensor

Procedures

1. Disconnect the clutch pedal position switch electrical connector.

Warning: Replacement or reprogramming of the ECM, or replacement of the clutch pedal position sensor (CPPS) or clutch pedal requires that a CPPS learn procedure be performed. Failure to perform the CPPS learn procedure may result in personal injury or damage to the vehicle or its components if the vehicle is in gear and the starter motor is accidentally engaged.

2. Perform the clutch pedal position sensor learn procedure. Refer to Clutch Pedal Position Sensor Learn or Clutch Pedal Position Sensor Learn .