Preliminary Procedure

Remove the front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .

1

Front Bumper Fascia Push-pins(Qty: 4)

Tip
Carefully push a small nylon wedge between the fascia and the fender. Insert a small flat-bladed tool into the fascia slot and depress the snaps one at a time and pull on the fascia at the same time to gradually remove the fascia from the bracket.

2

Front Bumper Fascia Retainer (Qty: 2)

Tip
Carefully push a small nylon wedge between the fascia and the fender. Insert a small flat-bladed tool into the fascia slot and depress the snaps one at a time and pull on the fascia at the same time to gradually remove the fascia from the bracket.

3

Front Bumper Fascia Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
10 N·m (89 lb in)

4

Front Bumper Fascia

Tip

Preliminary Procedures

1. Remove the front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .
2. Remove the front bumper fascia extension. Refer to Front Bumper Fascia Extension Replacement .

1

Front Bumper Fascia Screw (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tip
Carefully push a small nylon wedge between the fascia and the fender. Insert a small flat-bladed tool into the fascia slot and depress the snaps one at a time and pull on the fascia at the same time to gradually remove the fascia from the bracket.

Tighten
10 N·m (89 lb in)

2

Front Bumper Fascia

Tip