1

Intermediate Steering Shaft Bolt

Notice: Refer to Fastener Notice in the Preface section.

Tip
Secure the steering wheel to keep it from moving once the intermediate steering shaft is disconnected from the steering column.

Tighten
34 N·m (25 lb ft)

2

Intermediate Steering Shaft

Procedure

Mark the alignment of the intermediate steering shaft to the steering column before disconnecting it.

3

Steering Angle Sensor

Procedure

1. Disconnect any electrical connectors as needed.
2. Use the alignment bracket on the steering column when reinstalling the steering angle sensor.
3. Center the steering angle sensor. Refer to Steering Angle Sensor Centering.