Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

Caution: With a pressurized cooling system, the coolant temperature in the radiator can be considerably higher than the boiling point of the solution at atmospheric pressure. Removal of the surge tank cap, while the cooling system is hot and under high pressure, causes the solution to boil instantaneously with explosive force. This will cause the solution to spew out over the engine, the fenders, and the person removing the cap. Serious bodily injury may result.

1. Drain the cooling system. Refer to Cooling System Draining and Filling .
2. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement for the 2.2L engine or Air Cleaner Assembly Replacement for the 2.4L engine.

1

Heater Outlet Hose Assembly

Using the J 38185 Hose Clamp Pliers reposition the heater inlet hose clamp.

Preliminary Procedures

Drain the cooling system. Refer to Cooling System Draining and Filling .

1

Heater Outlet Hose

Procedure

Using J 38185 reposition the heater outlet hose clamps.

Special Tools

J 38185 Hose Clamp Pliers