Preliminary Procedures

1. Remove the windshield garnish moldings. Refer to Windshield Garnish Molding Replacement .
2. Remove the instrument panel cluster bezel trim plate. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .
3. Remove the instrument panel accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement .
4. Remove the instrument panel center compartment. Refer to Instrument Panel Center Compartment Replacement .
5. Remove the instrument panel inflatable restraint. Refer to Inflatable Restraint Instrument Panel Module Replacement .

1

Instrument Panel Upper Trim Pad Screw (Qty: 5)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

2

Instrument Panel Upper Trim Pad Assembly

Tip
Disconnect the electrical connectors.

3

Retainer Clips (Qty: 14)