GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.

  2. Object Number: 1376073  Size: SH
  3. Remove the front transaxle mount through bolt.

  4. Object Number: 1376115  Size: SH
  5. Remove the front transaxle mount to transaxle bolts.
  6. Remove the front transaxle mount from the vehicle.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1376115  Size: SH
  1. Install the front transaxle mount to the transaxle bolts, and tighten in sequence.
  2. Tighten
    Tighten the bolts to 90 N·m (66 lb ft).


    Object Number: 1376073  Size: SH
  3. Hand start the front transaxle mount through bolt.
  4. Note: The front and rear transaxle mounts must be allowed to settle with the through bolts loosened.

  5. Loosen the rear transaxle mount through bolt.
  6. Tighten the transaxle mount through bolts in the following order:
  7. Tighten

    1. Tighten the rear bolt to 100 N·m (74 lb ft).
    2. Tighten the front bolt to 100 N·m (74 lb ft).
  8. Lower the vehicle.