Removal Procedure
- Remove the drive belt. Refer to
Drive Belt Replacement.
- Insert a pry bar between the engine and the cradle, and raise the engine slightly until a socket with an extension can be installed onto the drive belt tensioner bolt.
- Remove the drive belt tensioner bolt.
- Remove the drive belt tensioner.
Installation Procedure
- Position the drive belt tensioner.
- Insert a pry bar between the engine and the cradle, and raise the engine slightly until the drive belt tensioner bolt can be installed.
Caution: Refer to Fastener Caution in the Preface section.
- Tighten the drive belt tensioner bolt.
Tighten
Tighten the bolt to 45 N·m (33 lb ft).
- Install the drive belt. Refer to
Drive Belt Replacement.