GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 HHR 🢒 Engine 🢒 Engine Controls and Fuel - 2.0L 🢒 Accelerator Pedal Position Sensor Replacement

Removal Procedure

    Object Number: 1633081 Size: SH
  1. Remove the insulator panel. Instrument Panel Insulator Replacement.
  2. Disconnect the accelerator pedal position (APP) sensor electrical connector (1).

    3. Object Number: 1633085 Size: SH
  3. Remove the APP sensor nuts.
  4. Remove the APP sensor.

Installation Procedure

    Object Number: 1633085 Size: SH
  1. Install the APP sensor.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the APP sensor nuts.

    3. Tighten
    Tighten the nuts to 10 N·m (89 lb in).


    Object Number: 1633081 Size: SH
  3. Connect the APP sensor electrical connector (1).
  4. Install the insulator panel. Instrument Panel Insulator Replacement.