GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Chevrolet
🢒
2009
🢒
HHR
🢒
Engine
🢒
Engine Mechanical - 2.0L
🢒 Engine Block Assemble
Install the drain plug in the water pump.
Apply GM P/N 12346004 (Canadian P/N 10953480), or equivalent, to the plug before installation.
Caution:
Refer to
Fastener Caution
in the Preface section.
Install the coolant jacket plugs and tighten to
35 N·m (26 lb ft)
.
Install the rear oil passage plugs.
Apply GM P/N 12346004 (Canadian P/N 10953480), or equivalent, to the plugs before installation. Tighten the oil passage plug to
60 N·m (44 lb ft)
.
Install the other oil passage plugs.
Apply GM P/N 12346004 (Canadian P/N 10953480), or equivalent, to the plug before installation. Tighten the oil passage plugs to
35 N·m (26 lb ft)
.
Lubricate the crankshaft position (CKP) sensor O-ring with clean engine oil.
Install the CKP sensor and bolt and tighten to
10 N·m (89 lb in)
.
Install the oil pressure switch and tighten to
26 N·m (19 lb ft)
.
Install the knock sensors and bolts. Tighten the knock sensor bolts to
25 N·m (18 lb ft)
.
Install the piston oil nozzle assemblies.
Install the piston oil nozzle assembly bolts and tighten to
15 N·m (11 lb ft)
.