Preliminary Procedure

Remove the interior trim panel. Refer to Front Side Door Trim Panel Replacement.

1

Outside Rearview Mirror Glass

Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section.

Procedure

1. Apply masking tape to the top of the outside of the mirror housing to prevent damage.
2. Push the mirror face inward at the bottom until full travel is reached.
3. Insert a J 38778 Door Trim Pad Clip Remover or equivalent behind the glass and the first rib support and pry outward until the mirror face is released.
4. When installing the mirror glass align the mirror face to the backing plate and apply pressure, using a rubber sanding block or equivalent, until an audible click is heard.

2

Front Door Mirror Motor Screw (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
3 N·m (25 lb in)

3

Front Door Outside Rearview Mirror Motor

Tip
Disconnect the electrical connector.