For 1990-2009 cars only
- Remove the ten channel plate bolts (8 and 25).
- Remove the channel plate assembly (27). Keep the following components with the channel plate:
- Remove and discard the channel plate to case gasket (28).
Caution: Pry on the channel plate near locating dowel pins (45) to prevent damage to sealing surfaces.
| • | The drive sprocket to channel plate thrust washer (34) |
| • | The three accumulator pistons (29) |
| • | The manual valve (800) |
| • | The detent lever spring (804) and bolt (805) |
