For 1990-2009 cars only
- Remove the three accumulator pistons (29) from the channel plate (27).
- Remove the 1-2 accumulator assist spring (125).
- Remove the 2-3 accumulator assist spring (47).
- Remove the seals (30) from the accumulator pistons (29).
- Discard the accumulator piston seals (30).
- Remove the manual valve (800) from the channel plate (27).
- Inspect the channel plate (27) for damage.
- inspect the channel plate (27) passages for debris.
- Inspect the accumulator pistons (29), the assist springs (47, 125), and the pins for damage.
- Inspect the channel plate sleeve for wear from the turbine shaft.
- Inspect the channel plate (27) bolt holes for stripped threads and debris.
- Inspect the channel plate machined surface for nicks or scratches that could cause a fluid leak.
- Inspect the manual valve (800) for freedom of movement.
- Inspect the drive sprocket to channel plate thrust washer (34).
- Clean and dry each component.
Note: The accumulator pins are pressed into the channel plate (27). Do not remove the accumulator pins.
Note: The 1-2 accumulator assist spring (125) has a retainer that presses into the spring. Keep the retainer and the spring together as an assembly.
