For 1990-2009 cars only
Special Tools
| • | J 41103-1 Torque Converter Seal Puller Legs |
| • | J 41103-2 Torque Converter Seal Puller Bridge |
| • | J 41103-3 Torque Converter Seal Support Body |
For equivalent regional tools, refer to Special Tools.
- Insert the three J 41103-1 puller legs under the Torque Converter Seal (54).
- Insert the J 41103-3 support body over the stator shaft (43).
- Insert the J 41103-2 puller bridge over the J 41103-3 support body . Connect the J 41103-1 puller legs into the slots on the J 41103-2 puller bridge .
- Tighten the forcing screw on the J 41103-2 puller bridge until the J 41103-1 puller legs remove the torque converter seal (54).
Note: The puller legs will damage the torque converter seal (54). Discard the torque converter seal (54) after removal.
