GM Service Manual Online
For 1990-2009 cars only

Special Tools

J 43482 Clutch Alignment Arbor

Removal Procedure

  1. Remove the transmission. Refer to Transmission Replacement.

  2. Object Number: 100727  Size: SH
  3. Remove the clutch cover bolts one turn at a time, until spring pressure is relieved.

  4. Object Number: 100733  Size: SH
  5. Remove the clutch cover and the clutch disc.

Installation Procedure


    Object Number: 100733  Size: SH
  1. Install the clutch disc and the clutch cover.
  2. Hand start the clutch cover to flywheel bolts, leaving the clutch cover loose enough to reposition for alignment.

  3. Object Number: 892789  Size: SH
  4. Install the J 43482 in order to support the clutch cover to the flywheel assembly.
  5. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 100744  Size: SH
  6. Tighten the clutch cover to flywheel bolts in the sequence shown to 30 N·m (22 lb ft).
  7. Recheck each bolt torque using the tightening sequence.
  8. Remove the J 43482 .
  9. Install the transmission. Refer to Transmission Replacement.
  10. Bleed the hydraulic system. Refer to Hydraulic Clutch Bleeding.
  11. Connect the negative battery cable.