1

Front Door Nameplate (SS)

Procedure

1. When removing protective liners from adhesive backed emblems/nameplates, be careful not to touch the tape with hands and do not allow the tape to come in contact with dirt or any foreign matter prior to adhesion.
2. Use a J 25070 or equivalent to remove the old emblem/nameplate. Clean all the adhesive residue from the door, wipe the surface dry with a clean lint-free towel prior to installing the new SS emblem/nameplate.
3. Press the emblem/nameplate firmly to the front door to ensure full adhesion to the door.

Special Tools

J 25070 Heat Gun - 500-750F