Preliminary Procedures

1. Remove the windshield garnish moldings. Refer to Windshield Garnish Molding Replacement.
2. Remove the instrument panel cluster bezel trim plate. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement.
3. Remove the instrument panel accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement.
4. Remove the instrument panel center compartment. Refer to Instrument Panel Center Compartment Replacement.
5. Remove the instrument panel inflatable restraint. Refer to Instrument Panel Inflatable Restraint Module Replacement.

1

Instrument Panel Upper Trim Pad Screw (Qty: 5)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

2

Instrument Panel Upper Trim Pad Assembly

Tip
Disconnect the electrical connectors.

3

Retainer Clip (Qty: 14)