Preliminary Procedure

Remove the front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement.

1

Front Bumper Fascia Push-Pins (Qty: 4)

Tip
Carefully push a small nylon wedge between the fascia and the fender. Insert a small flat-bladed tool into the fascia slot and depress the snaps one at a time and pull on the fascia at the same time to gradually remove the fascia from the bracket.

2

Front Bumper Fascia Retainer (Qty: 2)

Tip
Carefully push a small nylon wedge between the fascia and the fender. Insert a small flat-bladed tool into the fascia slot and depress the snaps one at a time and pull on the fascia at the same time to gradually remove the fascia from the bracket.

3

Front Bumper Fascia Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
10 N·m (89 lb in)

4

Front Bumper Fascia

Tip

Preliminary Procedures

1. Remove the front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement.
2. Remove the front bumper fascia extension. Refer to Front Bumper Fascia Extension Replacement.

1

Front Bumper Fascia Screw (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tip
Carefully push a small nylon wedge between the fascia and the fender. Insert a small flat-bladed tool into the fascia slot and depress the snaps one at a time and pull on the fascia at the same time to gradually remove the fascia from the bracket.

Tighten
10 N·m (89 lb in)

2

Front Bumper Fascia

Tip