Steering Angle Sensor Replacement. Chevrolet HHR 2009

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 HHR 🢒 Steering 🢒 Steering Wheel and Column 🢒 Steering Angle Sensor Replacement

Callout	Component Name
1	Intermediate Steering Shaft Bolt Caution: Refer to Fastener Caution in the Preface section. Tip Secure the steering wheel to keep it from moving once the intermediate steering shaft is disconnected from the steering column. Tighten 34 N·m (25 lb ft)
2	Intermediate Steering Shaft Procedure Mark the alignment of the intermediate steering shaft to the steering column before disconnecting it.
3	Steering Angle Sensor Procedure Disconnect any electrical connectors as needed. Use the alignment bracket on the steering column when reinstalling the steering angle sensor.

Callout

Component Name

Intermediate Steering Shaft Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tip
Secure the steering wheel to keep it from moving once the intermediate steering shaft is disconnected from the steering column.

Tighten
34 N·m (25 lb ft)

Intermediate Steering Shaft

Mark the alignment of the intermediate steering shaft to the steering column before disconnecting it.

Steering Angle Sensor

Disconnect any electrical connectors as needed.
Use the alignment bracket on the steering column when reinstalling the steering angle sensor.