| Table 1: | Instrument Panel Cluster Scan Tool Data Parameters |
| Table 2: | Instrument Panel Cluster Scan Tool Output Controls |
Parameter | System State | Expected Value | Description |
|---|---|---|---|
Operating Conditions: Ignition ON | |||
Battery Voltage Signal | -- | Varies | This displays Volts. This is the current battery voltage signal. |
DIC Information Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the driver information center (DIC) information switch. |
Ignition 1 Input | -- | Active | The scan tool displays Active or Inactive. This is the state of the ignition 1 input. |
Menu Switch | -- | Off | The scan tool displays On or Off. This is the state of the menu switch. |
Reset Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the reset switch. |
Output Control | Description |
|---|---|
Dimming | This output control is used to command the dimming to INCREASE or DECREASE by 20% increments. |
IPC Gauge Sweep Test | This output control is used to command the gages to sweep from minimum to maximum. |
Lamp Test | This output control is used to command the instrument panel indicators to turn ON and OFF. |
