Removal Procedure
- Open the sunshade to the full rearward position.
- Open the sunroof window (1) to the vent position.
- Detach both sides of the sunroof side opening closeout panel covers (6)
from the sunroof window clips (2).
- Open the sunroof to the full open position.
- Using a flat-bladed tool, press the locking tab (4) outward,
from inside the roof opening, in order to detach the side opening closeout
panel cover from the sunroof track channel (3).
- With the lock tab (4) depressed, lift the front edge of
the side opening closeout panel cover from the track, working towards the
rear of the sunroof opening.
- Repeat the steps for the entire length of the side opening closeout
panel cover (6).
- Remove the sunroof side opening closeout panel cover from the
sunroof module track assembly.
Installation Procedure
- Place in position, the new sunroof side opening
closeout panel cover (6) to the sunroof module track assembly (3).
- Hold the lower part (5) of the side opening closeout panel
cover firmly and press the locking tab (4) into the track assembly.
- Ensure the entire length of the side opening closeout panel cover (6)
is secure to the sunroof assembly track.
- Close the sunroof window (1).
- Open the sunroof window to the vent position.
- Secure the sunroof side opening closeout panel cover (6)
to the 3 clips (2) located on the inside edge of the sunroof
window.
- Close the sunroof window.
- Cycle the sunroof window to the vent position and full open positions
in order to ensure the sunroof side opening closeout panel covers are secure
to the attachment clips.
- Close the sunroof window.
- Close the sunshade.