Warning: Replace the passenger presence system as a complete assembly to prevent possible injury to the occupant. All the components in the service kit are assembled and calibrated as a unit. Using only some of the components in the service kit will cause the passenger presence system to operate improperly.

Preliminary Procedure

1. Remove the passenger seat back assembly. Refer to Driver or Passenger Seat Recliner Replacement.
2. Re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed. Refer to Control Module References.

1

Passenger Seat Wiring Harness Assembly

2

Passenger Seat Belt Buckle Assembly

Refer to Driver or Passenger Seat Belt Buckle Replacement.

3

Passenger Seat cushion Cover and Pad

Tip
Remove the seat back cushion cover and pad as an assembly.

4

Inflatable Restraint Front Passenger Presence Sensor Assembly

5

Passenger Seat Recliner Finish Cover Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

6

Passenger Seat Recliner Finish Cover (Qty: 2)

7

Passenger Seat Cushion Frame Rivet (Qty: 2)

8

Inflatable Restraint Front Passenger Presence Module Assembly

Tip

9

Passenger Seat Cushion Frame Assembly