Step | Action | Yes | No |
|---|---|---|---|
DEFINITION: Wear of the drive belt due to a incorrectly installed drive belt or a misaligned pulley. | |||
1 | Inspect the drive belt for looseness. Is the mark on the tensioner outside of the range, as indicated on the tensioner housing? | Go to Step 5 | Go to Step 2 |
2 | Check to see if the ribs in the drive belt match the grooves in the pulley. Do the ribs in the drive belt match the grooves in the pulley? | Go to Step 3 | Correct the pulley alignment. |
3 | Inspect the drive belt for signs of cracks, glazing or deterioration. Does the drive belt show signs of wear? | Go to Step 5 | Go to Step 4 |
4 | Inspect the drive belt for excessive oil or grease. Did you find and correct the condition? | Go to Step 5 | -- |
5 | Replace the drive belt. Refer to Drive Belt Replacement . Is the repair complete? | System OK | -- |
