Application | Specification | |
---|---|---|
Metric | English | |
Air Cleaner Intake Duct Screws | 2 N·m | 18 lb in |
Air Cleaner Assembly Screws | 4 N·m | 35 lb in |
A/C Refrigerant Pressure Sensor | 5 N·m | 44 lb in |
AIR Pump Mounting Bracket Nuts | 50 N·m | 37 lb ft |
AIR Pipe Bolts | 9 N·m | 80 lb in |
AIR Pump Exhaust Mounting Bolts | 10 N·m | 88 lb in |
AIR Secondary Injection Combination Valve Bolts | 9 N·m | 80 lb in |
AIR Vacuum Control Solenoid Bolts | 10 N·m | 88 lb in |
Accelerator Controls Cable Bracket | 16 N·m | 12 lb ft |
Camshaft Position (CMP) Sensor Retaining Bolt | 10 N·m | 90 lb in |
Crankshaft Balancer Bolt | 150 N·m +76° | 110 lb ft +76° |
Crankshaft Position (CKP) Sensor Bolts | 30 N·m | 22 lb ft |
EGR Valve Nuts | 25 N·m | 18 lb ft |
Engine Coolant Temperature (ECT) Sensor | 25 N·m | 18 lb ft |
Engine Oil Level Sensor | 34 N·m | 25 lb ft |
EVAP Vent Valve Bracket | 2 N·m | 18 lb in |
Exhaust Gas Recirculation Valve to Throttle Body Adapter Bolts | 30 N·m | 22 lb ft |
Fuel Filler Neck Bolts | 2 N·m | 18 lb in |
Fuel Injector Sight Shield | 2 N·m | 18 lb in |
Fuel Line Retainer | 12 N·m | 106 lb in |
Fuel Rail Attaching Nuts or Bolts | 10 N·m | 88 lb in |
Fuel Rail Hold-Down Stud | 25 N·m | 18 lb ft |
Fuel Tank Filler Pipe Hose Clamp | 8 N·m | 71 lb in |
Fuel Tank Retaining Strap Bolts | 48 N·m | 35 lb ft |
Fuel Tank Filler Pipe Ground Strap Screw | 9 N·m | 80 lb in |
Heated Oxygen Sensor(s) | 41 N·m | 30 lb ft |
Idle Air Control Attaching Screws | 3 N·m | 27 lb in |
Ignition Coil to Ignition Control Module Screws | 5 N·m | 40 lb in |
Ignition Control Module Assembly to Bracket Nuts | 8 N·m | 40 lb in |
Ignition Control Module 14 Way Connector To Module Bolt | 8 N·m | 71 lb in |
Intake Air Duct Clamp Screw(s) | 2 N·m | 18 lb in |
Intake Air Tube Clamp | 2 N·m | 18 lb in |
In-Line Fuel Filter Outlet Nut | 30 N·m | 22 lb ft |
Knock Sensor(s) | 19 N·m | 14 lb ft |
Knock Sensor Heat Shield Bolts | 60 N·m | 44 lb ft |
Manifold Absolute Pressure (MAP) Sensor Bracket Retaining Bolt | 30 N·m | 22 lb ft |
Mass Air (MAF) Flow Sensor Attaching Screws | 3 N·m | 27 lb in |
Powertrain Control Module (PCM) Bolts | 8 N·m | 71 lb in |
Spark Plug(s) | 27 N·m | 20 lb ft |
Throttle Body Retaining Nuts or Bolts | 10 N·m | 88 lb in |
Throttle Body Support Bracket (VIN K) | 10 N·m | 88 lb in |
Throttle Position (TP) Sensor Attaching Screws | 2 N·m | 18 lb in |
Transaxle Range Switch Attaching Bolts | 28 N·m | 20 lb ft |
Wheel Lug Nuts | 140 N·m | 104 lb ft |