GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Impala 🢒 Engine 🢒 Engine Electrical 🢒 Battery Hold Down Retainer Replacement

Removal Procedure
  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .

    2. Object Number: 513047 Size: SH
  2. Remove the battery hold down retainer bolt (1).
  3. Remove the battery hold down retainer (2).

Installation Procedure

    Object Number: 513047 Size: SH
  1. Install the battery hold down retainer (2).

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the battery hold down retainer bolt (1).

    3. Tighten
    Tighten the battery hold down retainer bolt to 18 N·m (13 lb ft).

  3. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .