GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Impala 🢒 Brakes 🢒 Hydraulic Brakes 🢒 Brake Pedal Push Rod Boot Retainer Replacement

Removal Procedure
  1. Remove the brake pedal reinforcement bracket. Refer to Brake Pedal Bracket Replacement .
  2. Remove the brake pedal push rod boot from the retainer.
  3. Inspect all of the parts for wear. Repair or replace the parts as needed.

Installation Procedure
  1. Install the brake pedal push rod boot to the retainer.
  2. Install the brake pedal reinforcement bracket. Refer to Brake Pedal Bracket Replacement .
  3. Adjust the stoplamp switch. Refer to Stop Lamp Switch Adjustment .