GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Impala 🢒 Transmission/Transaxle 🢒 Automatic Transaxle - 4T65-E 🢒 Automatic Transmission Shift Lock Control Replacement - Floor Shift Mounted

Removal Procedure
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.
  2. Remove the center console. Refer to Front Floor Console Replacement in Instrument Panel, Gauges and Console.

    3. Object Number: 190956 Size: SH
  3. Disconnect electrical connector from the A/T shift lock control (2).

    4. Object Number: 442716 Size: SH
  4. Remove both ends of the Automatic Transmission Shift Lock Control from pivot points (1).

Installation Procedure

    Object Number: 442716 Size: SH
  1. Install the A/T shift lock control upper clip onto upper pivot point, and lower clip onto the lower pivot point.
  2. Install the center console. Refer to Front Floor Console Replacement in Instrument Panel, Gauges and Console.
  3. Install the electrical connector to the A/T shift lock control.
  4. Connect negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.