For 1990-2009 cars only
- Install the shift lever (4) and secure it with the shift lever screw (3).
- Slide the shift lever seal (2) down the shift lever (4).
- Install the upper and lower trim cover assembly. Refer to the Trim Covers, Shift Lever Seal - Assemble - Off Vehicle .
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the screw to 20 N·m (15 lb ft).
