- Install the gearshift lever assembly support bracket and secure by using the 3 flat head 6-lobed socket tap screws.
- Insert the cam bushing (2) into the cable shift cam assembly.
- Install the cable shift cam assembly (1).
- Install the hexagon flange head bolt.
- Install the park lock cable assembly and secure by using the 2 oval head 6-lobed socket tap screws.
- Install the shift lever clevis (1).
- Install the ball actuator assembly (2).
- Install the hexagon flanged head bolt.
Important: Lubricate all moving parts of the linear shift assembly with synthetic grease.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the screws to 10 N·m (89 lb in).
Tighten
Tighten the screw to 18 N·m (14 lb ft).
Tighten
Tighten the screws to 6.5 N·m (58 lb in).
Tighten
Tighten the bolt to 18 N·m (14 lb ft).
