GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Impala 🢒 Restraints 🢒 Seat Belts 🢒 Coat Hook Replacement

Removal Procedure

    Object Number: 319885 Size: SH
  1. For the Monte Carlo, use a small, flat-bladed tool and pry the square retainer out.

    2. Remove the retainer from the coat hook.

  2. Pull out on the coat hook to remove the hook from the headliner.

    3. Object Number: 301265 Size: SH
  3. For the Impala, remove the retaining screw (1).
  4. Remove the coat hook from the headliner.

Installation Procedure

    Object Number: 319885 Size: SH
  1. For Monter Carlo, position the coat hook into the headliner.
  2. Install the push-in retainer pressing into place until flush with the coat hook.

    3. Object Number: 301265 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. For the Impala, install the retaining screw (1).

    4. Tighten
    Tighten the screw to 2 N·m (18 lb in).