Seat Belt Buckle Replacement - Center Front Split Bench

1. Remove the front seat. Refer to Split Bench Seat Replacement in Seats.

Important: When drilling out the rivet do not enlarge the rivet hole.

2. Using a 6.35 mm (¼ in) drill bit, drill out the rivet that retains the front seat belt buckle to the rear of the front seat track.



3. Remove the front seat belt buckle from the front seat track.

1. Position the front seat belt buckle anchor to the front seat track.

Important: The rivet is only used for installation alignment.




2. Install the new rivet which secures the front seat belt buckle to the rear of the front seat track.
3. Install the front seat. Refer to Split Bench Seat Replacement in Seats.