GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Impala 🢒 Restraints 🢒 Seat Belts 🢒 Seat Belt Replacement - Center Rear

Removal Procedure

    Object Number: 793771 Size: SH
  1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.
  2. Remove the nuts (1) from the center rear seat belts.
  3. Remove the center rear seat belts from the vehicle.

Installation Procedure

    Object Number: 793771 Size: SH
  1. Position the center rear seat belts to the anchor studs.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the nuts (1) to the rear seat center belts.

    3. Tighten
    Tighten the nuts to 42 N·m (31 lb ft).

  3. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.