Turn the steering wheel
so that the vehicle's wheels are pointing straight ahead.
Turn OFF the ignition.
Remove the key from the ignition switch.
Remove the LH instrument panel access hole cover.
Remove the SRS Fuse from the fuse block.
Important: With the SRS Fuse removed and the ignition ON, The AIR BAG
warning lamp illuminates. This is normal operation and does not indicate an
SIR system malfunction.
Remove the RH instrument
panel access hole cover.
Unclip the frontal air bags yellow 4-way connector from the metal
rail.
Remove the connector position assurance (CPA) from the frontal
air bags yellow 4-way connector.
Disconnect the frontal air bags yellow 4-way connector.
Remove the connector position
assurance (CPA) from the driver side air bag yellow 2-way connector (4) located
under the driver seat, if the vehicle is equipped with a driver side air
bag.
Disconnect the driver side air bag yellow 2-way connector.